IBM Travelstar 5GS free download

File name IBM Travelstar 5GS.PDF

IBM storage products Quick installation guide Travelstar 5GS AT/IDE Models: DPLA-24480 & DPLA-25120 Handling precautions Quick installation procedure 1. Do not cover the breather hole! Covering the Note: It is advisable to backup all data before breather hole may result in loss of data. proceeding with the installation. If your system BIOS cannot handle large capacity drives (over 540 MB), you may need to use a disk overlay program such as Ontrack's Disk Manager. The following procedure uses the Ontrack Disk Manager software. Information on obtaining a copy of 2. Do not press on the drive! Do not apply any force Ontrack's Disk Manager can be found on the Web at to the drive during handling or installation. www.ibm.com/harddrive. Setting the jumpers 1. In a one drive system, configure your new drive as Master (Device 0) with no jumpers installed. 2. In a two drive system, one drive must be desig- 3. Always handle the drive with care to prevent nated as the Master, the other as the Slave (Device 1). damage from shock, vibration, or electrostatic 3. When installing the new drive as a Slave, check the discharge (ESD). Master drive to determine if a jumper change is 4. Do not open the static-protective bag containing the required to indicate that a Slave drive is present. drive until required. Static electricity can damage the 4. Consult your manual to see if your computer drive. supports Cable Select before choosing this option. 5. Turn off and unplug your computer. Remove the cover. 6. When installing the drive, touch a grounded, Never Attach A No Jumper Jumper Pos-1 Jumper Pos-3 Never Attach A unpainted metal surface with the static-protective (Master) (Slave) (Cable Select) Jumper Here! Jumper Here! package containing the drive for at least two seconds. (This drains static electricity from the package and from your body.) 7. H